Reply To: FilePlayer.ino Compiles but will not upload

[Anonymous]

If it helps, here is the information that is repeated back when I ask for verbose output in compilation & upload.

Using library SPI in folder: C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI

Using library SdFat in folder: C:\Program Files (x86)\Arduino\libraries\SdFat (legacy)

Using library SFEMP3Shield in folder: C:\Program Files (x86)\Arduino\libraries\SFEMP3Shield (legacy)

 

C:\Program Files (x86)\Arduino/hardware/tools/avr/bin/avr-g++ -c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10600 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino -IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\standard -IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI -IC:\Program Files (x86)\Arduino\libraries\SdFat -IC:\Program Files (x86)\Arduino\libraries\SFEMP3Shield C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\FilePlayer.cpp -o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\FilePlayer.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SPI\SPI.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\istream.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\MinimumSerial.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\ostream.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\Sd2Card.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdBaseFile.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdBaseFilePrint.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdFat.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdFatErrorPrint.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdFatUtil.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdFile.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdSpiArduino.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdSpiAVR.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdSpiMK20DX128.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdSpiSAM3X.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdStream.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdVolume.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SFEMP3Shield\SFEMP3Shield.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\hooks.c.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\WInterrupts.c.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\wiring.c.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\wiring_analog.c.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\wiring_digital.c.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\wiring_pulse.c.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\wiring_shift.c.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\abi.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\CDC.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\HardwareSerial.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\HardwareSerial0.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\HardwareSerial1.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\HardwareSerial2.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\HardwareSerial3.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\HID.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\IPAddress.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\main.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\new.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\Print.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\Stream.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\Tone.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\USBCore.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\WMath.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\WString.cpp.o

Using previously compiled file: C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\core.a

C:\Program Files (x86)\Arduino/hardware/tools/avr/bin/avr-gcc -w -Os -Wl,–gc-sections -mmcu=atmega328p -o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp/FilePlayer.cpp.elf C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\FilePlayer.cpp.o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SPI\SPI.cpp.o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\istream.cpp.o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\MinimumSerial.cpp.o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\ostream.cpp.o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\Sd2Card.cpp.o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdBaseFile.cpp.o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdBaseFilePrint.cpp.o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdFat.cpp.o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdFatErrorPrint.cpp.o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdFatUtil.cpp.o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdFile.cpp.o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdSpiArduino.cpp.o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdSpiAVR.cpp.o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdSpiMK20DX128.cpp.o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdSpiSAM3X.cpp.o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdStream.cpp.o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SdFat\SdVolume.cpp.o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp\SFEMP3Shield\SFEMP3Shield.cpp.o C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp/core.a -LC:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp -lm

C:\Program Files (x86)\Arduino/hardware/tools/avr/bin/avr-objcopy -O ihex -j .eeprom –set-section-flags=.eeprom=alloc,load –no-change-warnings –change-section-lma .eeprom=0 C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp/FilePlayer.cpp.elf C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp/FilePlayer.cpp.eep

C:\Program Files (x86)\Arduino/hardware/tools/avr/bin/avr-objcopy -O ihex -R .eeprom C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp/FilePlayer.cpp.elf C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp/FilePlayer.cpp.hex

 

Sketch uses 30,048 bytes (93%) of program storage space. Maximum is 32,256 bytes.

Global variables use 987 bytes (48%) of dynamic memory, leaving 1,061 bytes for local variables. Maximum is 2,048 bytes.

C:\Program Files (x86)\Arduino/hardware/tools/avr/bin/avrdude -CC:\Program Files (x86)\Arduino/hardware/tools/avr/etc/avrdude.conf -v -patmega328p -carduino -PCOM5 -b115200 -D -Uflash:w:C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp/FilePlayer.cpp.hex:i

 

avrdude: Version 6.0.1, compiled on Apr  3 2014 at 23:12:16

Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

Copyright (c) 2007-2009 Joerg Wunsch

 

System wide configuration file is “C:\Program Files (x86)\Arduino/hardware/tools/avr/etc/avrdude.conf”

 

Using Port                    : COM5

Using Programmer              : arduino

Overriding Baud Rate          : 115200

AVR Part                      : ATmega328P

Chip Erase delay              : 9000 us

PAGEL                         : PD7

BS2                           : PC2

RESET disposition             : dedicated

RETRY pulse                   : SCK

serial program mode           : yes

parallel program mode         : yes

Timeout                       : 200

StabDelay                     : 100

CmdexeDelay                   : 25

SyncLoops                     : 32

ByteDelay                     : 0

PollIndex                     : 3

PollValue                     : 0x53

Memory Detail                 :

 

Block Poll               Page                       Polled

Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack

———– —- —– —– —- —— —— —- —— —– —– ———

eeprom        65    20     4    0 no       1024    4      0  3600  3600 0xff 0xff

flash         65     6   128    0 yes     32768  128    256  4500  4500 0xff 0xff

lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00

hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00

efuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00

lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00

calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00

signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

 

Programmer Type : Arduino

Description     : Arduino

Hardware Version: 3

Firmware Version: 3.3

Vtarget         : 0.3 V

Varef           : 0.3 V

Oscillator      : 28.800 kHz

SCK period      : 3.3 us

 

avrdude: AVR device initialized and ready to accept instructions

 

Reading | ################################################## | 100% 0.00s

 

avrdude: Device signature = 0x1e950f

avrdude: reading input file “C:\Users\Tom\AppData\Local\Temp\build2301078848211232830.tmp/FilePlayer.cpp.hex”

avrdude: writing flash (30048 bytes):

 

Writing | ###############################################avrdude: stk500_recv(): programmer is not responding

Problem uploading to board.  See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.