Home › Forums › Sparkfun MP3 Shield Library Support Forum › FilePlayer.ino Compiles but will not upload › Reply To: FilePlayer.ino Compiles but will not upload
Today was eventful, I took an old Core2Duo laptop out of the closet, formatted it down and installed Windows 7 fresh. Then installed Arduino 1.0.5-r2, and tried to upload the FilePlayer sketch to my UNOs, and still no joy. As you brought up, my com ports are stable, so I’ll go with the 328P chip needing to be replaced. I’ll order up a couple from Sparkfun or Adafruit next week.
I was able to find a generic OSEPP UNO R3 Plus from Fry’s Electronics in my travels today. It did take the FilePlayer code, and all is well. The track list is still as listed in my previous post. I’ll delete all of the files, set up the permanent ones on a pc hard drive, and then copy them over to the micro-SD at the same time, maybe that will make a difference. Otherwise, I’ll learn to deal with that curve-ball.
Just wanted to thank you again for your help!
