OK, I have a working module now. There is a resistor missing (R4) below the crystal. solder in a 1M ohm resistor. I had no SMD resistors so I used a small radial 1/4 watt and it works perfectly now.
I’ve also worked out the kinks in the demo sketch and Bill’s libraries for this Elecfreaks module. I’m adding full joystick support to the demo now. When done I will link to the .rar files
Image of the missing resistor to follow …
https://www.dropbox.com/sh/kpek17x9o38ak9n/y5OKKntPYn/_ardusat/Elecfreaks%20MP3/modification.jpg
