Home Forums Sparkfun MP3 Shield Library Support Forum Problems with Sparkfun MP3 straight from the box Reply To: Problems with Sparkfun MP3 straight from the box

#2742
Anonymous
Inactive

Hi guys,

I have encountered a similar problem, and I’m not sure what to do! Basically, I am unable to get any sound of the board, whether it be from the sine wave test, or playing off the card. I am also getting the error code 6 and patch not found warning upon startup as well. Everything compiles and uploads without a hitch, and I can get to the menu fine, but when I enter the “1” command for the first audio file, it shows “Received command: 1” and then freezes without making any sound. When I run the “d” command I can see my audio files on the SD card fine, so I’m assuming that it is working properly. However, when I run the “m” command, I get result “0”, whereas it says I should get result 0x83FF.

Any ideas would be so much appreciated! 😀

Ezra