Home Forums EasyTransfer Library Support Forum noob help for control stepper motor

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #1856

    hi Bill,


    iam working on a pan tilt system i made it working with 2 servo motors and ET it was working great now iam upgrading the pan with a stepper uln 2003 but i cant get it to talk because i dont understand wat i need to write in ET for control the stepper do i have to put on both arduinoss the whole sketch or can i send only the changing values from the joystick i use stepper.h now its working on one arduino but how do i talke trough the other i use cat5 50 m ic2 library


    hi all,

    in the meantime i digged myself into the easytransfer library and found a solution about how to get a steppermotor and servo working for my pantiltzoom cam only some finetuning now thanks for the library Bill.

    greetz Richie


    So have you gotten it figured out?

    Sorry for the late reply, I’m recovering from surgery.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.